Overview

The IS type pump is a single-stage single suction centrifugal pump ( axial suction ), for the transport of liquid temperature less than 100℃, the Maximum working pressure of not more than1.6MPa in the water or the physical and chemical properties similar to clear liquid with. Apply to industry, city water supply and drainage, and can also be used for the farmland, orchard irrigation and drainage. 

Features

1. The pump has compact structure, small volume and beautiful appearance. Its horizontalstructure has a low center of gravity and the center of gravity in the center of the lower half of the pump, which enhances the running stability and life of the pump.

2. Easy to install. The inlet and outlet diameters are the same and are on the same centerline, which can be directly installed in any part of the pipeline like a valve. The motor and rain cover can be used outdoors. The pump is provided with mounting feet for stable installation of the pump.

3. Smooth operation, low noise and high concentricity of components. The motor adopts low-noise bearings, and is equipped with a non-stop refueling device. The pump impeller has excellent dynamic and static balance, no vibration during operation, and improves the use environment.

4. No leakage. The shaft seal adopts corrosion-resistant hard alloy mechanical seal, which solves the problem of serious leakage of the packing seal of the centrifugal pump, prolongs the service life, and ensures the clean and tidy operating site.

5. Easy to maintain. There is no need to disassemble the pipeline, just remove the pump cover nut, take out the rotor and the transmission components for maintenance.

6. The pump can be installed vertically, horizontally or in multiple ways according to the on-site use conditions. According to the flow and lift requirements, the parallel and series methods are adopted to increase the required flow and lift.

The excellent design of our company's engineers, components made of high-quality materials can extend the life of the pump, reduce the frequency of maintenance, operation stability in complex environments, but it  also cause different prices. If you need more details about this, you can click on the news or send an email to ask us

Model Explanation  IS (R),CIH80-65 -160A（B, C）  

IS—International standard centrifugal pump

R—Hot water

CIH—Series marine horizontal chemical pump

80—Inlet diameter 80mm

65—Outlet diameter 65mm

160—Impeller diameter 160mm

A(B、C)—Impeller processed with 1（2, 3）time cutting

Main technical parameter