HL Sulfur Pumps

Introduction:

HL type sulfur pump is vertical, single stage, single suction centrifugal submerged pump, which confroms to API 610 standard.

Performance:

Applications:

Chemmical Industry

Auxiliary System

Flue gas desulfurized

Metalurgy Industry

Structural Features:

The rotor could be adjusted, it is safe and reliable for shaft connecting design.

The axial thrust is balanced by balancing hole or vice-vane, reducing the axial thrust, the bearing runs reliably.

The casing diameter above 80mm(incouding 80mm), which would be designed for double-volute to balance the radial stress.

The impeller is immersed into the media when the pump starts up. Exhausted gas will never be brawn up for its easy start.

The pump shaft is supported by multi-point, including rolling bearing nd sliding bearing. The support point is designed reasonably and the pump opeartion speed in less than its critical speed far. Either self-lubraication or out-lubrication can be use selected according to the liquid cleanity.

The vapor attemprator would be used ofr the middle pipe and drainge pipe, which prevent the liquid crystal; the cooling water sleeve is arranged for bearing house to prelong the pump life.