HSP Chemical Mixed-Flow Pumps

Introduction:

The HSP series pump is single-stage, single-stage and single overhung centrifugal pump that applied in the neutral or caustic liquid with soild which is high flow and low head.

HSP mixed-flow pumps confroms to GB/T 13008 standard.

Performance:

Applications:

The imposed circulation in chemical industry process.

Sea water culture and desalt.

The gas project in the city.

Water treatment system

Paper-making industry.

Features:

High efficiency, low energy loss.

The pump energy consumption is evenly within the performance limit, it could startup under closed valve condition, so the motor could not overload.

The large wetted section; not plugged easily.

The firmly structure and long running life.

The Horizontal Structure(HSP):

The pump is " pull out" structure, the casing has not to be dismantled from connecting pipeline during maintaining. The shaft is produced precisely, and the bearing with oil lubracating, the protective shaft is installed in packing housing, the oil level could be controlled by constant level oiler in bearing housing.

Vertical Structure(HSPV):

The pump structure is compact, and the covering area is small, it is conveniently for installing, the motor is connected with casing by vertical housing. It is not necessary to dismantle the pipeline, using thr grease to lubracate.

The support foot is cast on casing, which could stand the load from pipeline, and transmitting it to the base plate, so the rotor could not bend for pump loading, therefore, the bearing is garanteed for long life.

In order to vent for suction pipe conveniently, the compete vent  device is equipped on pump.

The pump rotation direction: it is CW viewing from the driving end.

The power: adopting motor or gas engine.

In order to drain conveniently for suction pipeline, the completely drain equipment could be installed on setting.